Join us

Sign up to the mailing list for to be the first to know about new RUUSK RINGS & VIP events.
I promise to only send you good things :)

No Thanks

Ring Sizing


As your ring is made especially for you, it is important that you take a moment to check your ring size before ordering.

HOW ACCURATE IS MEASURING MY OWN RING SIZE?
For a more accurate ring size we recommend visiting a local jeweller to have them check your ring size in store.

If this is not possible, you may use the below methods to help you determine your ring size fairly accurately. You can also order a RUUSK ring sizer.

ESTIMATING YOUR RING SIZE BASED ON A RING YOU OWN
Select a ring of the same thickness or as close to the thickness of the ring you are wanting to purchase. This is important as you will need a larger ring size if you are purchasing a ring with a thicker band. For a thin band a smaller size is usually needed.

1. Measuring the inside diameter of the ring
This is a measurement taken across the centre of the ring from the inside of one side to the inside of the other side (do not include the thickness of the ring). Check this a couple of times for a more accurate reading.

2. Measuring the inside circumference of the ring
Get a stiff piece of paper as thin as possible and slide it inside the ring until it fits perfectly - remove and measure. Allow a touch extra to compensate for the thickness of the paper inside the ring. 

You can then use both of these measurements with the ring chart below to estimate your ring size.


MEASURING YOUR RING SIZE WITHOUT A RING
Please bear in mind that your finger will change size throughout the day and with temperature changes ect. It's best to measure your finger at the end of the day (usually it's at it's largest) and not when you are cold as this will provide you with a smaller reading.

Take a piece of stiff cardboard/paper wire and wrap it around the finger then mark the exact spot where the ends join. Measure the length of this piece of cardboard or wire and check the ring size chart. (Best not to use string as this will bend to fit your finger and often will give you an inaccurate measurement) 


RING SIZE CHART

All rings are made in Australian ring sizes so please refer to the blow table to see how these relate to international sizes. Please note that ring sizes may vary slightly and this is simply to be used as a guide.

Inside Diameter 

Inside Circumference

Sizes

MM

Inches

MM

Inches

UK / AUS

 US / CA

14.65

0.577

46.02

1.81

H

3 3/4

15.04

0.592

47.25

1.86

I

4 1/4

15.4

0.606

48.38

1.9

J

4 5/8

15.8

0.622

49.64

1.95

K

5 1/8

16.1

0.634

50.58

1.99

L

5 1/2

16.51

0.65

51.87

2.04

M

6

16.92

0.666

53.16

2.09

N

6 1/2

17.35

0.683

54.51

2.15

O

7

17.75

0.699

55.76

2.2

P

7 1/2

18.19

0.716

57.15

2.25

Q

8

18.61

0.733

58.47

2.3

R

8 5/8

19.1

0.752

60

2.36

S

9 1/8

19.51

0.768

61.29

2.41

T

9 5/8

 

Please note that all the information is provided as a guide and I cannot guarantee the accuracy of your ring sizing.

If you have any questions regarding sizing please don't hesitate to contact me for further assistance.